top of page
New cylinder testing machine
model MPC0,7 FOUR STATION
New testing machine model MPC0,7 FOUR STATION with 4 simultaneous testing stations.
The machine can test up to 4 cylinders in the same test cycle, in fully automatic mode and having individual control on each cylinder.
This machine represents one of our most important models in the testing of hydraulic cylinders, some particularities:
-
Tests up to 600 BAR;
-
Automatic flow regulation from 3 up to 120 Lt/min;
-
High precision control in stroke measurement;
-
Testing in intermediate position to intercept internal leaks in the piston;
-
Advanced management of test reports, with data collection on the single cylinder and grouping of tests divided by production batch;
-
High level of filtration to work in NAS5 class;
-
Automatic control and regulation of process oil temperature;
-
And much more to discover;
The MPC 0.7 FOUR Station model is designed for testing large production runs, where precise tests need to be done, but many have to be done in one day.
The machine is equipped with an integral protection system which divides the testing station from the station where the operator prepares the next cylinders to be tested or unloads the cylinders that have just been tested.
Dead times are eliminated.
A visual and audible system quickly alerts the operator if a test result is negative.
Wide possibilities of digital interconnections between the machine and the company, always remaining connected with us for continuous direct remote assistance.
Cylinder testing machines model MPC0.7
This machine is equipped with a complete enterprise integration system.
This machine is designed to carry out control tests at the end of the production line for important dynamic testsyou.
There are many possible customizations on the user's request.
Cylinder testing machines model MPC0.1
Fully automatic operation in test execution.
Automatic creation of the test report at the end of each test.
The machine is designed to be connected to the corporate network.
Insertion and spin automatic assembly bench
up to diameter: 300 run: 3000.
The machine has a digital relationship between the builder and the customer, between the operator and the maintainer using the over-amortization.
Release a report whit date, code, quantity or lot, with the result of the pair used during the cycle.
We remain at your disposal to answer any questions you may have.
Test equipment to check possible cylinder liner, pipe and seal leakages by compressed air pressurization of the cylinder immersed in a test fluid.
Possible leakages put in evidence by air bubbling.
Pressure washing machine to remove fabrication dross and calamine from liner and A + B tube internals by oil jetting up to 120 lt/min.
Three filtration level nets of removable type for cleaning.
bottom of page